Detailed Product Description

PRODUCT DESCRIPTION         

JIAYUAN Grey Silicone Adhesive Gasket Maker is a 
single component, room temperature vulcanizing
(RTV) gasketing compound, designed for the sealing of
mechanical assemblies.  Upon curing from the exposure to
moisture in the air, this non-sagging paste forms a tough,
flexible, waterproof seal of silicone rubber, which resists aging,
weathering and thermal cycling without hardening, shrinking or
cracking.  Conforms to MIL-A-46106B, Type I.  JIAYUAN
Grey RTV Silicone Adhesive Sealant shall meet the
requirements of the F.D.A. Code of Federal Regulations 21
CFR concerning food contact applications if used in
accordance with its Section 177.2600: Rubber Articles
Intended for Repeated Use.
 
PRODUCT BENEFITS
  Easy application
  Applied to horizontal or vertical surfaces
  Superior adhesion and flexibility
  Waterproofs
  Insulates
  Unaffected by vibration
  Non-flammable 

TYPICAL APPLICATIONS 
JIAYUA Grey Silicone Gasket Maker is an excellent all-
purpose adhesive/sealant for the following materials:
  Metal
  Glass
  Wood
  Plastic
  Silicone resin
  Vulcanized silicone rubber
  Ceramics
  Natural and synthetic fibers
  Painted surfaces 

DIRECTIONS FOR USE
For Assembly
1.  Remove all previous material from mating surfaces.  
JIYUAN Gasket Remover  is recommended for most 
materials, not  for plastics or painted surfaces.
2.  For best results, clean and dry all surfaces with a
residue-free solvent, such as JIYUAN Brake and
Parts Cleaner.
3.  Cut nozzle to desired bead size, 1/16 to 1/4 in
diameter.  An 1/8 bead is usually sufficient for most
applications.
4.  Remove cap, puncture tube or cartridge seal and attach
extension nozzle.
5.  Apply a continuous and even bead of silicone to one
surface, as shown below: 
  6.  Assemble parts immediately while silicone is still wet. 
Secure or tighten as required, avoiding excessive
squeeze-out.
7.  Re-torque will not be necessary after the product has
cured.